masdar solar energy solutions
masdar solar energy solutions masdar solar energy solutions masdar solar energy solutions masdar solar energy solutions masdar solar energy solutions
1 2 3 4 5

We are proud to provide to our clients the latest revolution technology , the PSS or Power Saving System for commercial and industrial business

Save power with at least 15 to 20% in KWH and in total monthly bill , how PSS works ? :
Technical Information’s

It is given that the conventional capacitor is acting as reactive power generators.This saves a considerable amount of the reactive power required for sustaining the electromagnetic field. So, by providing the reactive power (KVAr), they reduce the apparent power(KVA) drawn from the power supply and this in return leads to an improvement in the power factor (PF) as shown below:

http://www.energyaction.com.au/images/PFC-Tri4.gif

Power Factor is defined as the ratio of working power to apparent power.

On the other hand, all capacitors in the PSS panel are well treated with special material, the functioning and effectiveness of capacitors depends largely on the extent of material used to construct the dielectric between the capacitor plates so as to generate active power (P2) in the load-circuit. The direct impact of generated active power (P2) is to decrease the required active power (P1) from the source of power
The amount of (P2) reaches to be 20% to 30% of the total electric currents, which represents the desired savings in the customers' bills.
The underlying causes of not achieving any savings due to the inadequacy of the materials used and ineffective treatment for capacitors, bear in mind that all types of material suffer from aging, which reduces their ability to function properly over time. Thus, capacitors often need to be replaced if used continuously. Also, misplacing inefficient installation considered a key reason for not achieving any savings in KW consumption.

A.      Construction Materials
All materials carry special specifications and satisfy special requirements for safe operation.
List of The main component of APSS


Product Type

Country/Co

Standard

Operating Life/Years

Capacitors

FRAKO / Germany

EN60831 – 1/2

2/3

Controller

DUCATI or ENTES (Italy)

IEC,ANSI, IEEE, B.S.S. IECE1326 Acc.

3

Filters

DUCATI / Italy

EN60146, IEEE519

3

Contactors

Telemecanique / Schneider

IEC 60947-2, IEC60947-3

3

MCCB

Merlin Gerin / Schneider

CEI EN 61921

3

FUSES

DUCATI

IEC269, DIN 43620,

3

Skeleton 

European made

 

5

 

B.      Results and benefits
The APSS will have the following direct benefits for the electrical installation:

1.            Reduction in KW consumption by 20% as minimum.
2.            considerable reduction in the current consumption AMPS
3.            Considerable reduction in the apparent power KVA
4.            Considerable reduction in the reactive power KAVR
5.            Optimization of power factors up to 0.99
6.            Improvement of cables motors and transformer’s efficiency.

 Warranties
a.            One year warranty for the right function of our equipment since the date of project delivery in operation.
b.            Expected life time span is 5/7 years
c.             Free replacement for any parts of PSS supplied during its warranty period 
d.            15 years installations warranty

Download the power saving system Brochure

 

Please send your request or questions to : info@masdare.com